Production

With the double crucible induction furnace of 4,3 + 4,3 tons, a single piece of gross casting from 5 kg to 7.5 tons is made. The heat treatment of the poured parts is carried out with a 20-ton capacity electric annealing furnace under temperature control. Cast steel, low alloy steel casting, high alloy steel casting, gray cast iron, nodular cast iron, high chrome white metal casting, high chrome nickel cast iron (Ni-Hard) material parts can be cast. There is an existing laboratory in our factory. In our company, molding with alpha set resin, molding in wet sand, and vertical molding with a Disamatic molding machine is made. Our company has ISO Quality Standard. Below are some pieces of equipment in our company for your information.

• 1 x 4,3 + 4,3 ton capacity two pot induction furnace
• 1 x double-arm alpha set resin molding mixer with 20 tons/hour capacity
• 1 x set of 20 tons/hour capacity resinous sand recycling reclamation system 2 pieces of 2 and 4 tons capacity cleaning cabins
• 1 x electric PLC controlled heat treatment furnace with a capacity of 20 tons
• 4 x various cranes with a capacity of 5 – 10 tons
• 1 x green sand plant with a capacity of 50 tons/hour
• 1 x Disamatic molding line in 600 x 775 dimensions
• 1 x Spectrometer analyzer and sample preparation device
• 1 x BMS 3000 Brinel Constant Hardness device
• 1 x HLN-11A Portable Hardness Tester
• ,1 x Olympus Metal Microscope
• 1 x Ultrasound Controller
• 1 x laboratory type Oven